TDK Lambda | Z+Low Voltage User Manual

5.9.4 Save <1..4> This command saves the present state of the power supply to a specified location in memory (refer to Table 5-7). Up to 4 states can be stored. Storage locations 1 through 4 are in nonvolatile memory. Save Front panel setting: 1. Press MENU button. MENU (green) LED illuminates. ”  ” message appears on the Voltage display. 2. Rotate Voltage encoder until ”  ” message appears on Voltage display. 3. Press Voltage encoder. ”  ” message appears on Voltage display. 4. Press Voltage encoder. ”  ” message appears on Voltage display. Numbers ” 1..4 ” appear on Current display. 5. Rotate the Current encoder to select required number value and then press the Current encoder. Display blinks and returns to previous level. 5.9.5 Recall <1..4> This command recalls the present state of the power supply from a specified location in memory (refer to Table 5-7). Up to 4 states can be stored. Storage locations 1 through 4 are in nonvolatile memory. Recall front panel setting: 1. Press MENU button. MENU (green) LED illuminates. ”  ” message appears on the Voltage display. 2. Rotate the Voltage encoder until ”  ” message appears on Voltage display. 3. Press Voltage encoder. ”  ” message appears on Current display. 4. Press Current encoder. Numbers ” 1..4 ” appear on Current display. 5. Rotate the Current encoder to select required number value and then press the Current encoder. Display blinks and returns to previous level.

74