TDK Lambda | Z+High Voltage User Manual

4.3.2 J3 Connector Terminal and Function Control and monitoring signals are isolated from the power supply output.

Connector Technical Information • Connector type: 43650-0801, MOLEX. • Receptacle type: 43645-0800, MOLEX. • Contact pins: 43030-0002, MOLEX. • Hand tool: 63819-0000, MOLEX. • Wire: AWG 20-24

8 7 6 5 4 3 2 1

Fig.4-4: J3 connector terminals and functions

Pin Signal name

Function

Section

1 2 3 4 5 6 7 8

Programmed Signal 1 General Purpose Open collector Port 1

5.7.3 5.7.4 8.5.2

PS_OK

Output for indication of the power supply status. High level is OK.

Trigger Out

Trigger output, positive true, pulse width: Min. 10usec

ILC

Enable /Disable the power supply output by dry-contact (short/open). 5.7.2

Shut Off (SO)

Input for shut off control of the power supply output.

5.7.1 5.7.3

Programmed Signal 2 General Purpose Open collector Port 2

IFC_COM Trigger In

Isolated interface, common.

CMOS level input for triggering power supply output. Positive edge, pulse width: Min. 10usec.

8.5.1

Table 4-4: J3 connector terminals and functions

53