TDK Lambda | Z+High Voltage User Manual

REGULATORY NOTICES

FCC Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. WARNING: Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment under FCC Rules. Safety Approvals UL61010-1 and CSA22.2 No.61010-1 - cTUVus. IEC 61010-1 - CB Test Report and Certificate. EN 61010-1 - TUV Mark, CE mark. EN 61326-1 Marking by the CE Symbol indicates compliance to the EMC Directive, the Low Voltage Directive of the European Union. A “Declaration of Conformity” in accordance with the preceding directives and standards has been madeand is on fileat our EUrepresentativeTDKLAMBDAGermanyGmbH, Karl-Bold-Str.40, D-77855Achern. A “Declaration of Conformity”may be accessed via company web site: www.emea.tdk-lambda.com/manual WARNING: This is a Class A product. On a domestic environment, this product may cause radio interference in which case user may be required to take adequate measures. OTHER Z200, Z400, Z600, Z800 series are comply with the following Directives:

• RoHS2 Directive (2011/65/EU); • WEEE Directive (2002/96/EC).

9