TDK Lambda | Z+High Voltage User Manual

Global Commands List

Result From Supply

Command Name

Description

SCPI Format

GEN Format

Enable all Outputs Output On to last V & I levels Disable all Outputs Turn outputs Off to zero V & I Program all Voltages Set all power supply output voltage Program all Currents Set all power supply output current

GLOBal:OUTPut:STATe 1|ON

GOUT 1

None

GLOBal:OUTPut:STATe 0|OFF

GOUT 0

None

GLOBal:VOLTage:[AMPLitude] xxx.yy GPV xxx.yy

None

GLOBal:CURRent:[AMPLitude] xxx.yy GPC xxx.yy

None

Save Settings of all power supplies Recall Settings of all power supplies Reset all supplies

Same as *SAV n

GLOBal:*SAV

GSAV n

None

Same as *RCL n

GLOBal:*RCL

GRCL n

None

Same as *RST

GLOBal:*RST

GRST

None

Table ‎ 7-12: Global Commands

7.13 Command Summary Common Commands

SCPI Command

Description

GEN Command

*CLS

Clear status

CLS

*ESE

Standard event status enable

*ESE? *ESR? *IDN? *OPC *OPC? *OPT?

Return standard event status enable

Return event status register

Return instrument identification string Set ”operation complete” bit in ESR

IDN?

Return a ”1”when operation command complete

Return option number

*PSC {1|0}

Power - ON status enable (1) /disable (0)

*PSC?

Power - ON status clear

*RCL {1|2|3|4}

Recalls a saved instrument state

RCL RST SAV

*RST

Reset

*SAV {1|2|3|4} *SRE

Saves an instrument state

Set service request enable register Return service request enable register

*SRE? *STB? *TRG

Return status byte

Trigger

115