TDK Lambda | Z+High Voltage User Manual

SYSTem:DATE?

SCPI Command Syntax GEN Command Syntax

SYSTem:DATE?

DATE?

Query Syntax

SYSTem:DATE?

Returned Parameters

yyyy/mm/dd

SYSTem:PON:TIME? Time measured from first power On.

SCPI Command Syntax

SYSTem:PON:TIME?

Parameters

Minute

Example

6534

Returned Parameters

7.12.11 TRIGger Subsystem

NOTE: TheTrigger subsystemmust be enabled fromthe Initiate subsystemor no triggering actionwill occur.

TRIGger When theTrigger subsystem is enabled, TRIGgenerates an immediate trigger signal that bypasses selected TRIG:DEL.

SCPI Command Syntax GEN Command Syntax

TRIGger[:STARt][:IMMediate]

None None

Parameters

TRIGgger:DELay Sets the time delay between the detection of an event on the specified trigger source and the start of any corresponding trigger action on the power supply output.

SCPI Command Syntax GEN Command Syntax

TRIGger[:STARt]:DELay

None

Default Suffix

S 0

*RST Value Examples

TRIG:DEL .25 TRIG:DEL MAX TRIGger[:STARt]:DELay?

Query Syntax

Returned Parameters

112