TDK Lambda | Z+Low Voltage User Manual

Z + 600 Series Specifications INPUT CHARACTERISTICS Z 10-60 20-30 36-18 60-10 100-6 1. Input voltage/freq. (*3) --- 85~265Vac continuous, 47~63Hz, single phase 2. Maximum Input current 100/200VAC (*4) --- 7.48/3.69 7.22/3.56 7.70/3.80 7.13/3.52 7.13/3.52 3. Power Factor (Typ) --- 0.99 at 100, 0.98 at 200Vac, 100% load 4. Efficiency (Typ) 100/200VAC (*4) % 81/83 84/86 85/87 85/87 85/87 5. Inrush current (*5) --- Less than 30A ENVIRONMENTAL CONDITIONS 1. Operating temperature --- 0~50°C, 100% load. 2. Storage temperature --- -20~85°C

3. Operating humidity % 20~90% RH (no condensation). 4. Storage humidity % 10~95% RH (no condensation). 5. Altitude --- Maximum 3000m. Derate ambient temp above 2000m. Operating: Maximum ambient temperature, From 2000m up to 3000m Ambient temperature 40°C. SAFETY/EMC 1. Applicable standards: Safety --- IEC61010-1, UL61010-1, CSA22.2 No.61010-1, EN61010-1. 10V≤Vout≤60V: Output,J1,J2,J3,J4,USB,LAN,IEEE/ISOLATED Analog are Non Hazardous 4. Conducted emission --- IEC/EN61326-1 Industrial Location - B, FCC part 15-B, VCCI-B 5. Radiated emission --- IEC/EN61326-1 Industrial Location - A, FCC part 15-A, VCCI-A MECHANICAL 1. Cooling --- Forced air cooling by internal fan. 2. Weight STANDARD Kg Less than 2.1Kg. 3. Dimensions (WxHxD)

Vout=100V:Output,J1,J2 are Hazardous J3,J4,USB, IEEE/ISOLATED Analog ,LAN are Non Hazardous EMC (*21) --- IEC/EN61326-1 2. Withstand voltage --- 10Vout36V models: Input-Output&J1, J2, J3, J4, USB, LAN/IEEE/ISOLATED ANALOG: 4242VDC/1min; Input-Ground: 2828VDC/1min. Output&J1, J2, J3, J4, USB, LAN/IEEE/ISOLATED ANALOG-Ground: 707VDC/1min. 60V,100V models: Input-Output&J1,J2: 4242VDC/1min; Input-J3,J4,USB,LAN/IEEE/ISOLATED Analog: 4242VDC/1min; Input-Ground: 2828VDC/1min. Output&J1, J2- J3, J4, USB, LAN/IEEE/ISOLATED ANALOG: 1910VDC/1min; Output&J1, J2-Ground: 1380VDC/1min. J3, J4, USB/LAN/IEEE/ISOLATED ANALOG - Ground: 707VDC/1min; 3. Insulation resistance --- More than 100Mohm at 25°C, 70%RH. Less than 2.6Kg. Wide body with Isolated analog or Binding post or IEEE. WIDE BODY Kg STANDARD mm H: 83, W: 70, D: 350 (excluding bus bars, handles…). (Refer to Outline drawing) H: 83, W: 105, D: 350 (excluding bus bars, handles…). (Refer to Outline drawing) WIDE BODY mm 4. Vibration --- According to: IEC60068-2-64 5. Shock --- Less than 20G, half sine, 11mS. Unit is unpacked. According to: IEC60068-2-27

26