TDK Lambda | Z+Low Voltage User Manual

SAFETY VENTILATION The ventilation openings on these products must not be covered. Ensure that there is at least 10cm spacing between any obstruction and the ventilation openings. INPUT AND OUTPUT CABLES Must use cableswith the appropriate voltage and temperature ratings toensure safe, reliableoperation. ACCESSORIES Only accessories which meet the manufacturer's specifications shall be used. For identification and instructions for connection of accessories, refer to the user manual. HANDLING, LIFTING AND CARRYING Handling, lifting and carrying of the equipment shall be made only according to the instructions specified in the user manual to avoid potential personal injury. DISCONNECT DEVICE The appliance coupler is the main disconnect device of the equipment which reliably shuts off the supply from the equipment. The positioning of the equipment must not make it difficult to operate the disconnect device. NOTE: The switch incorporated in the equipment does NOT act as a main disconnect device and does not cut the supply or power from the equipment. It is added as a means to shut down certain circuits inside the power supply such as the display and the output circuit. INSTALLATION Installation of the equipment or the system incorporating the equipment must be in accordancewith the installation instructions provided by the manufacturer. The safety of any system incorporating the equipment is the responsibility of the assembler. IMPROPER USAGE OF THE EQUIPMENT If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.