TDK Lambda | Z+Low Voltage User Manual

CHAPTER 1: GENERAL INFORMATION

1.1 User Manual Content This user'smanual contains the operating instructions, installation instructions and specifications of the Z + Series 200W, 400W, 600W and 800W power supply series. The instructions refer to the standard power supplies, including the built-in USB and RS232/485 serial communication. For information related to operation with the optional LAN and IEEE, refer to User Manual for power

supply LAN and IEEE. 1.2 Introduction 1.2.1 General Description

Z + Series power supplies are wide output range, high performance switching power supplies. The Z + Series is power factor corrected and operates fromworldwide AC voltage range continuously. Output voltage and current are continuously displayed and LED indicators show the complete operating status of the power supply. The Front Panel controls allow the user to set the output parameters, theprotection levels (Over-Voltageprotection, Under-VoltageprotectionandFoldback) and preview the settings. The rear panel includes the necessary connectors to control andmonitor the power supply operation by remote analog signals or by the built-in serial communicationUSB and RS232/485. LAN, IEEE and Isolated-Analog programming/monitoring are optional. 1.2.2 Models Covered by this Manual Model Voltage range (V) Current range (A) Model Voltage range (V) Current range (A) Z10-20 0-10 0-20 Z60-3.5 0-60 0-3.5 Z10-40 0-10 0-40 Z60-7 0-60 0-7 Z10-60 0-10 0-60 Z60-10 0-60 0-10 Z10-72 0-10 0-72 Z60-14 0-60 0-14 Z20-10 0-20 0-10 Z100-2 0-100 0-2 Z20-20 0-20 0-20 Z100-4 0-100 0-4 Z20-30 0-20 0-30 Z100-6 0-100 0-6 Z20-40 0-20 0-40 Z100-8 0-100 0-8 Z36-6 0-36 0-6 Z36-12 0-36 0-12 Z36-18 0-36 0-18 Z36-24 0-36 0-24 1.2.3 Features and Options • Constant Voltage / Constant Current with automatic crossover. • Active Power Factor correction. • Universal Input Voltage 85-265Vac, continuous operation. • Embedded Microprocessor Controller. • Built in USB & RS232/485 Interface. • Voltage & Current high resolution adjustment by digital Encoders. • High resolution 16 bit ADCs & DACs. • Software Calibration (no internal trimmers / potentiometers). • Last Setting Memory. • Independent Remote ON/OFF (Opto-Isolated) and Remote Enable/Disable. • Parallel operation (Master/Slave) with Active current sharing. • Remote sensing to compensate for voltage drop of power leads. • External Analog Programming and Monitoring (0-5V or 0-10V, user selectable). • Cooling fan speed control for low noise and extended fan life. • Optional LAN interface (SCPI compatible). • Optional IEEE interface (SCPI compatible). • Optional IsolatedAnalogprogramming/monitoring (0-5Vor 0-10V, user selectable and4-20mA).

13